General-Purpose Type LC-300

Measurement principle
Zirconia concentration cell type
Type
Separate-type (converter: wall-mounted; sensor: direct insertion type)
Display system
4-digit digital display (concentration display)
Measurement range
0-1 / 10 / 100 / 1000ppm / 1 / 10 / 100vol%O2　10-20～10-0atm
Automatic range
Repeatability
Within ±0.5% of full scale; range of 0-1% or more
Within ±1% of full scale or ±0.1 ppm, whichever is larger; range of less than 0-1%
Concentrations in the 0-1 ppm, atm range are out of warranty.
Number of measurement points
1～8
Sample gas requirements
Pressure
10-3to 200KPa (absolute pressure)
Flow rate
0.5 to 5,000 mL/min or 0 mL/min (measurement in state of natural dispersion)
Humidity
Dew point below ambient temperature
Temperature
0 to 100°C
Others
Must not contain corrosive gas (fluorine gas, chlorine gas, sulfuric gas, etc.), gas containing organic silicone, flammable substances (including gas), oil or moisture
Reference gas
Atmosphere
Recorder output
Transmission output only
Transmission output
RS-232C
Alarm output
None
Warmup time
6 minutes or less
Dimensions
MS-500(controller)
92 mm (W) ×44 mm (H)×120 mm (D)　 (excluding projecting parts)
MS-510(converter)
100 mm (W) ×40 mm (H)×88 mm (D)　 (excluding projecting parts)
Sensor unit
SD16NW
Overall length 100mm(sensor ⌀ 11×39,body ⌀ 40×51)
SD25NW
Overall length 100mm(sensor ⌀ 11×42,body ⌀ 40×48)
SD40NW
Overall length 100mm(sensor ⌀ 11×41,body ⌀ 40×49)
Gas Analyzer