Back to Top

Hi, Guest!

  LOKASI :  Kota Bogor

Bergabung Selama : 17 Tahun


Bagikan :
Kontak Kami  
Instrumentation & Valves

Class21 Class 1 Div 2 Led High Bay Light 50w 80w 30w 75w Explosion Pro

Update Terakhir
29 / 05 / 2023
Min. Pembelian
1 Unit
Dilihat Sebanyak
2 kali


*Instrumentation, Control System, Automation, Cooler & Heat Exchanger, Electrical, Mechanical, Analyzers, Fabricator & Engineering Service & Training*

Detail Class21 Class 1 Div 2 Led High Bay Light 50w 80w 30w 75w Explosion Pro

Class21 Class 1 Div 2 Led High Bay Light 50w 80w 30w 75w Explosion Proof Lamps

Class1 Class21 Explosion Proof Led High Bay Lights 30w 50w 75w​


1. Explosive gas mixture hazardous locations: Zone 1 and Zone 2.
2. Explosive gas mixtures: IIA, IIB, IIC.
3. flammable dust environment:21,22 area
4. often be used in chemical plant,gas station,oil station,workshop,warehouse,

pharmaceuticals,smelting, shipbuilding, military, textile and other flammable and explosive places.


1.Shell made of high strength aluminum alloy casting off surface after blast cleaning by high voltage electrostatic spray.
2.Lamp housing is made of high borosilicate toughened glass with transmittance.It's the antiglare design.
3. With grids to adjust lighting effect and reduce the glare.
4. Modular plug structure design, only need disconnect end cover draw out core to change tubes.
5. Constant current output, stable performance.

6. Low power consumption, high light efficiency, good color rendering property.


GYD6801, GYD6802
Light effect
125-135 Lm/w
AC95-230V 50/60Hz
Life Hour
50000 hours
Protection level
Anticorrosion grade
Explosion proof mark
Ex d IIC T6 Gb; Ex tD A21 IP66 T80°
Color Rendering
Beam Angle
120°, 60°, 90°

Installation Instructions:

Before installation, check voltage, power and other parameters carefully

and make installation preparations arrordingly to layout circuit.

1. organize firstly supporting spare parts and accessories
2. do shut off power before installation
3. the loading capacity of the ceilingfixed item where the lamp is installed should be the same as the lamp weight
4. do power-on test to make sure the lamp can be lighted
5. make sure the lamp is installed firmly, turn on the light finally

Lampu LED
Tampilkan Lebih Banyak