Detail EN-308 NDIR TYPE INFRARED GAS ANALYZER
OVERVIEW
EN-308 can measure any component concentration from CO, CO2, CH4, SO2, NO in the mixed gas continuously. The analyzer has such function as isolated current output, relay alarm output, communication interface and measured data memory. It is widely used in the industries of petroleum, metallurgy, architectural material, electric power, air separation, chemical, environmental protection, pharmaceutical as well.
FEATURES
Membrane micro-pressure detector,with high sensitivity and low across-sensitivity
Enclosed infrared light source and sealed optical path, with high reliability and low drift
Big LCD display, English or Chinese menu, with automatic diagnosis working status
Automatic memory measured data and curve, with checking privious measured data
One isolated, linearized 0~10 or 4~20mADC outputs
Two alarm relay, with upper or lower limit alarm point can be set within the full range
With RS232 interface for measured data communicationSPECIFICATIONS
Measured component:CO、CO2、CH4、NO、SO2
Minimum range:0~20×10-6(ppm)
Maximum range:0~50%(>50% consulting with us)
Linearity error:≤±1%FS
Outline dimension:483×133×360mm
REQUIREMENTS FOR MEASURED GAS
Temoerature:5~40℃
Pressure:0.002~0.05MPa
Dust :0.3μm or less (Recommended membrane filter)
Moisture: Below a level where saturation occurs at 2°C (condensation unallowable)
Gas Analyzer.
Tampilkan Lebih Banyak