HGD Electromagnetic Flow Meter ( New Model: SY-LDY )

HGD Electromagnetic Flow Meter ( New Model: SY-LDY )

HGD Electromagnetic Flow Meter is mainly used to measure the volume flow of water, waste water, sewage, beverage, pulp, slurry, the fluid temperature usually not more than 120℃, fluid’s conductivity not less than 5μS/cm. HGD Electromagnetic Flow Meter’s standard configuration has grounding electode. HGD Electromagnetic Flow Meter’s option communication: RS485, HART, Profibus DP, profibus PA.

HGD Electromagnetic Flow Meter is widely used in oil and gas field water injection, sewage treatment, paper making, municipal water supply and drainage.
Hot Tags: About Suyi Group，Flow Instrument，Level Transmitter，water flow meter

Technical data of HGD Electromagnetic Flow Meter
Suitable Diameter
DN10~DN2600 (below DN25 non-standard)
Electrode quantity
3pcs ( a pair of measuring electrode and a ground electrode)
Suitable Fluid
Liquid with conductivity not less than 5 μs/cm
Measuring Range
0.5~10m/s (extendable to 15m/s)
Upper Limit of Span
0.5~10m/s. 1~5m/s recommended
Accuracy
0.5%, 1.0% of F.S.
Repeatability
Better than 0.25%
Display of Converter
Display : Flow rate ( 4-digits), Totalizer (9-digits), Velocity, Alarm status by LCD ( LED-option)
Flow unit: L/h, L/m, L/s, m3/h, m3/min, m3/s,
USG/h, USG/min,USG/s ( USG is us Gallon on request )
Flow direction : selectable by program
3 Digits display below of decimal points.
K-factor: 5 digits.
Programming language: English, Chinese
Structure option: Compact type; Remote Type
Power supply option
85 ~ 250VAC / 50 or 60Hz; 20 ~ 36VDC, Battery power: 3.6V lithium battery
Output Signal
4~20m ADC, load ≤ 750ohm,
0~3kHz, 5V with source and changeable width.High terminal and effective frequency output
Voltage output:0-5 V DC
Conduit connection
Thread M20 * 1.5
Communication option
RS-485; HART
Operation Pressure
1.0MPa, 1.6MPa, 4.0MPa, 16MPa (Special)
Operation temperature
Depends on liner material
Ambient Temperature
Sensor -40°C ~80°C. transducer -10°C ~50°C
Ambient Humidity
≤ 85%RH (at 20 ℃)
Power Consumption
≤ 8W
Wheather-proof
Compact type: IP65. Remote type: sensor IP68, transducer IP65.
Electrode material option
316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum
Liner material option
PTFE, Soft rubber, Hard rubber, F46, FS, PUR.
Meter tube material option
Carbon steel, SS304
Connection type
Flange connection, Tri-clamp
Flange standard option
GB9119-88 (DIN2051, BS4504), JIS, ANSI
Explosion-proof
Exd mb IICT6 Gb
Certificate
ISO9001:2015, ISO14001:2015, SIL 3, OHSAS18001:2007