Back to Top

Hi, Guest!

Model 905P Process O2 Analyzer

Update Terakhir
: 01 / 12 / 2019

The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms.

This process o2 analyzer is available with any single range from 0 to 5% up to 0 to 100% O2 vol/vol full scale.

For those applications where a source of sample flow is not available, the 905P can be equipped with an optional sample pump which can operate in a continuous or batch (1-10 seconds) mode.

ABOUT THE O2 SENSOR

The Model 905P design incorporates a long-life, heavy duty, proprietary electrochemical, maintenance free sensor. The sensor is totally sealed, operates at room temperature and is internally compensated for slight temperature variations. Unlike other sensors, it is not dependent on a controlled flow rate for accuracy, is not heated and is not affected by  high levels of CO2, hydrocarbon or other gases.

The sensor assembly is cable connected to the control circuit board. It can be used with diffusion or pumped sample draw systems. The measurement accuracy is not affected by sample flow rate.

The expected electrochemical sensor life is typically 5 years, unlike other analyzers with an electrochemical sensor that last 1-2 years.

OPTIONAL INTERNAL BATTERY

With its low power requirement, the Model 905P can be operated with an optional battery for those applications where AC power is not readily available. A totally sealed, long-life internal 12 Vdc gel battery accepts a full or partial charging cycle and will operate the unit for up to 8 hours

Selengkapnya..
preloader
model 905p process o2 analyzer

Detail Model 905P Process O2 Analyzer

The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms.

This process o2 analyzer is available with any single range from 0 to 5% up to 0 to 100% O2 vol/vol full scale.

For those applications where a source of sample flow is not available, the 905P can be equipped with an optional sample pump which can operate in a continuous or batch (1-10 seconds) mode.

ABOUT THE O2 SENSOR

The Model 905P design incorporates a long-life, heavy duty, proprietary electrochemical, maintenance free sensor. The sensor is totally sealed, operates at room temperature and is internally compensated for slight temperature variations. Unlike other sensors, it is not dependent on a controlled flow rate for accuracy, is not heated and is not affected by  high levels of CO2, hydrocarbon or other gases.

The sensor assembly is cable connected to the control circuit board. It can be used with diffusion or pumped sample draw systems. The measurement accuracy is not affected by sample flow rate.

The expected electrochemical sensor life is typically 5 years, unlike other analyzers with an electrochemical sensor that last 1-2 years.

OPTIONAL INTERNAL BATTERY

With its low power requirement, the Model 905P can be operated with an optional battery for those applications where AC power is not readily available. A totally sealed, long-life internal 12 Vdc gel battery accepts a full or partial charging cycle and will operate the unit for up to 8 hours

Tampilkan Lebih Banyak
pt. rexindo ototeknik
Sales & Admin Office : Villa Mutiara Bogor Sekttor I Blok C1 No.9 Kelurahan Mekarwangi Kec. Tanah Sareal Kotamadya Bogor Jawa Barat 16168 – INDONESIAPhone (0251) 7595433 Faximile (0251) 7595433Office & Workshop : Jl. Toyogiri Selatan No.77 Kel. Jatimulya Kec. Tambun Selatan Bekasi Timur Jawa Barat 17515 – INDONESIA.Phone: (021) 82746125 Faximile: (021) 82435319, Bekasi
Indonesia 17510
Bekasi
-
Hubungi Kami
BEST DEAL