TCM ESTA System Flow Meter

TCM ESTA System
for Modbus RTU communication via RS485 for applications in ESTA systems
Spraying is a process for coating surfaces with paints and varnishes. In general, the paint is atomized and applied with compressed air using a paint spray gun or paint nozzles. This method is often used but has the disadvantage that the loss of paint through the spray mist passing components is relatively high.

Features & Benefits
High material yield and reduced air flow due to less overspray
Short coating time due to the electrostatic “wrap-around” and uniform build-up of the coating thickness in one operation
First-class surface properties with regard to: chemical resistance, abrasion resistance, corrosion protection and optical requirements
No moving parts in the flow meter
Pneumatic Power Generation Unit that supplies the complete Tricor coriolis family (Classic with TCE6000 or 8000)
Fiber optical cabel
Fiber optical converter for Modbus RTU communication via RS485
USB RS485 converter (optional)

Functions & Specifications
TRICOR Classic Series and ESTA PackageFlow Meter
To be selected separately
Electronics
TCE 6000
TCE 8000 (24VDC-Version)
Power Consumption
Max. 7W
Max. 4W
Supply Voltage
24 V DC (via Pneumatic Power Generator)
Interface
RS485
Communication
Modbus RTU (single mode or Multidrop)
Ambient Temperature
0 °C … + 50 °C [+32 °F … +122 °F]
Storage Temperature
-40 °C … + 80 °C [-40 °F … +176 °F]
Process Temperature (Flow Meter)
-40 °C … + 70 °C [-40 °F … +158 °F]
Protection Class
IP65 (Coriolis meter and Pneumatic Power Generator)
IP30 (for the RS485 to fiber converter)
Electrical connections
M12 plug (5-pin, female) for RS485 (cable length: 2.5 m)
M12 plug (5-pin, male) for Pneumatic Power Generator
(cable length: 2.5 m)
Clamp terminal via enclosure cable gland Cable length (TCE-junction box):
1.5 m
Cable length (junction box-Pneumatic Power Generator): 1.5 m
Certification
CE, PED, RoHS, REACH, ATEX (3G) for TRICOR Classic Series

RS485 to fiber converterTCF-142 converter

Ambient Temperature
0 °C ... +60 °C [+32 °F ... +140 °F]
Supply Voltage
12 to 48 V DC
Input current
70 to 140 mA @12 to 48 V DC
Protection Class
IP30
RS485 Data Direction Control
ADDC (R) (automatic data direction control)
Pull High / Low Restistor for RS485
1 kOhm, 150 kOhm
Latency
300 ns
Serial signals
RS485-2w
Data+, Data-, GND
Mounting
Screwable or DIN-rail (35 mm)
Dimensions
See dimensional drawing

Fiber Optic CablePatch cord

Cable material
LZSH
Strength Member
Aramid
Crush
1000 N
Attenuation
3.0 dB/km @850 nm / 0.8 dB/km @1300 nm
Bandwidth OFL
200 MHz x km @850 nm / 500 MHz x km @1300 nm
Ambient Temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Cable Length
10m

Pneumatic Power Generation UnitPressure min/max
3/7 bar [45/100 psi]
Max. output at 7 bar
7.5 W
Compressed air consumption at 7 bar
50 NI/Min
Process connection
G1/8”
Temperature range
0 °C ... +50 °C [+32 °F ... +122 °F]
Housing
Aluminum
Included
Compressor connection G 1/8”
Connection cable, 2.5 meters
With M8 plug-in connector (3-pin, female) for Pneumatic Power Generation Unit
With M12 plug-in connector (5-pin, male for TCE 6000)
Dimension
See dimensional drawings