HGCD Insertion Electromagnetic Flow Meter

HGCD Insertion Electromagnetic Flow Meter

Product description: HGCD Insertion Electromagnetic Flow Meter is mainly used to measure the volume flow of water, waste water, sewage, beverage, pulp, slurry, the fluid temperature usually not more than 120℃, fluid’s conductivity not less than 5μS/cm. It resolve the problem that it is difficult to install pipeline type meter on large size of pipe, meanwhile it saves a lot of cost compared to pipeline type meter. It is according to the principle of NIKURADS to measure average velocity of fluid, then get the volume of fluid flow.
Hot Tags: About Suyi Group，Flow Instrument，Level Transmitter，water flow meter
Technical data of HGCD Insertion Electromagnetic Flow Meter

Integrate type
Remote type
Accuracy
±1.5%
Size
DN150-DN3000
DN150-DN3000
Flange standard
GB9119 stainless steel
Pressure rating
1.6Mpa
Transmitter housing
die-casting aluminum alloy
Sensor/Transducer
Stainless steel body / PVDF liner
Net weight
About 6 kg
About 8 kg
Electrical conductivity
≥5μs/cm
Electrode
316L, Hastelloy, Titanium
Output
1KHz ( 2KHz ), 4-20mA
Communication
RS232, RS485, HART
Power supply
220VAC, 24VDC, 3.6V lithium battery
Weather proof
IP65 / IP67
IP65 / IP67 / IP68
Explosion pfoof
Exd IICT4
Fluid Temp.
80℃
80℃ (120℃ optional)
Storage Temp.
-40℃～+60℃
Ambient Temp.
-20℃～+55℃
Repeatability
≤±0.01% / ≤±0.25%
Analog output error
≤±0.02mA
Measure range
≤10m/s
Ability for bury

≤5m only for IP68
Electrical entry
M20*1.5, G1/2, NPT1/2

Transducer cable

<30m (special order for longer cable)