LU-907M Intelligent PID Position Proportion Regulator

LU-907M Intelligent PID Position Proportion Regulator

1. Brief Introduction
LU-907M Intelligent PID Position Proportion Regulator is mainly used to kiln stove temperature control, it abbreviate the servo amplifier and directly drive the implementing actuator. It can either work on the situation of with valve feedback signal or without valve feedback signal that replaced by virtual valve, then abbreviate the tedious line connection of feedback signal.

2. The main Technical Parameters
◆Input accuracy: ± (0.2%F.S+1) digit
◆Resolution: 1, 0.1
◆Display: Double Four LED Numerical Code Tube + light pillar (valve status)
◆input type: K、S、B、T、E、J、WRe325、N
Pt100、Cu50、Cu100
0-10 mA、 4-20mA
0-5V 、1-5V
specially input: R 、Wre526、mV、other
◆output model types：
J1: relay output (resistance 250VAC/3A normally open and hold)
J2: relay output (resistance 250VAC/0.8A normally open)
J4: silicon-controlled none-trigger output (resistance 250VAC/5A normally open)
T: SSR trigger output (12V/40mA)
V1：DC12V/50 mA sensors power supply model
V2：DC24V/50 mA sensors power supply model
R：RS232 communication model
S：RS485 communication model
◆the T.C cold-junction compensation errors: ±1 ℃
◆the T.C breaks or measuring range ultra: Display Sb
◆sampling rate: 0.8 seconds
◆power voltage: 85-264VAC
◆power consumption: 4W
Digital Controller