Back to Top

Hi, Guest!
pt. rexindo ototeknik

PT. REXINDO OTOTEKNIK
pt. rexindo ototeknik
PT. REXINDO OTOTEKNIK

  LOKASI :  Kota Bogor

Bergabung Selama : 18 Tahun

BAGIKAN :   

Bagikan :
Kontak Kami  
X
X
Field Instrumentation & Controls
*Instrumentation, Control System, Automation, Cooler & Heat Exchanger, Electrical, Mechanical, Analyzers, Fabricator & Engineering Service & Training*

YOKOGAWA CORP. JAPAN PT. REXINDO OTOTEKNIK Terlengkap

BEST DEAL
Yokogawa's main businesses are industrial automation and test and measurement hardware and software. Some of Yokogawa's main hardware products are Pressure Transmitters, Flow meters, analysers, controllers, recorders and data acquisition equipment. Yokogawa products are used in different industries requiring process control systems. Depending on the size of the project and the requirements, Yokogawa offers various control systems: DCS, PLC, SCADA and ESD (emergency shutdown). In collaboration with Shell Global Solutions, Yokogawa also offers advanced process control (APC) solutions for refineries, petrochemical plants, and chemical plants.[11] Centum, Yokogawa's flagship DCS, has the largest capacity among DCSs, supporting up to 1 million device tags. Yokogawa manufactures field instruments, test and measurement instruments, and semi-conductor related products. Yokogawa designs and manufactures the most advanced confocal spinning disks used in confocal microscopy.[12][13]
gas analyzer calorimeter cm6g

Gas Analyzer Calorimeter CM6G

The CM6G Gas Calorimeter is used to measure and control the calorific value or Wobbe Index (WI) of the sample gas. In this calorimeter, the sample gas is burnt at the burner with air and the temperature difference between the combustion exhaust gas and the feed air at the burner inlet is detected by
CALL
infrared gas analyzer ir400

Infrared Gas Analyzer IR400

The IR400 infrared gas analyzer is capable of measuring the concentrations of NO, SO2, CO2, CO, CH4 and O2 components in sample gas. NO, SO2, CO2, CO and CH4 are measured by the non-dispersive infrared method (NDIR), while O2 is measured by built-in paramagnetic sensor or external zirconia sensor. A
CALL
infrared gas analyzer ir202

Infrared Gas Analyzer IR202

The model IR202 is capable of measuring concentration of CO2, CO, CH4, SO2, and NO components in process gas by using the non-dispersive infrared method (NDIR), while measuring O2 with the paramagnetic or zirconia method.A maximum of 4 components including O2 (or up to 3 components without O2
CALL
explosion-protected model infrared gas analyzer ir810s

Explosion-Protected Model Infrared Gas Analyzer IR810S

NDIR Anayzer for Hazardouse Area CEMS and Combustion ControlIECEx/ATEX ZONE1In recent years, environmental measurement has become increasingly important from the perspective of SDGs and carbon neutrality, and measurement accuracy standards are becoming more stringent every year.The
CALL
infrared gas analyzer ir800g, ir810g

Infrared Gas Analyzer IR800G, IR810G

Responding to a Wide Range of Needs from Environmental Issues to Combustion ControlSimultaneous Measurement of Up to Five ComponentsIn recent years, environmental measurement has become increasingly important from the perspective of SDGs and carbon neutrality, and measurement accuracy st
CALL
exa gd402 gas density gas analyzer

EXA GD402 Gas Density Gas Analyzer

There are many applications where the accurate, repeatable measurement of gas density is essential. From blending of fuel, to product quality, to Hydrogen purity and replacement in utility turbines, Yokogawa's family of Gas Density products allow you to make accurate measurements with superior relia
CALL
paramagnetic oxygen gas analyzer (general purpose type) mg8g

Paramagnetic Oxygen Gas Analyzer (General Purpose Type) MG8G

The MG8G paramagnetic oxygen analyzer measures the concentration of oxygen based on the fact that a magnet attracts gaseous oxygen. Whereas zirconia oxygen analyzers cannot measure oxygen in flammable gas mixtures, the MG8G can measure oxygen concentration in flammable gas mixtures.With
CALL
paramagnetic oxygen gas analyzer (flameproof type) mg8e

Paramagnetic Oxygen Gas Analyzer (Flameproof Type) MG8E

The MG8E paramagnetic oxygen analyzer measures the concentration of oxygen, employing a technique that is based on the fact that a magnet attracts gaseous oxygen. Whereas zirconia oxygen analyzers cannot measure oxygen in flammable gas mixtures, the MG8E can measure not only the oxygen concentration
CALL
low concentration (ppm) zirconia oxygen gas analyzer ox400

Low Concentration (ppm) Zirconia Oxygen Gas Analyzer OX400

This is the latest oxygen analyzer from Yokogawa, and its development was based on the company's long experience and strong track record with this technology.A proprietary new thin-film deposition technology was used in the zirconia sensor that creates a molecular bond between the zircon
CALL
multi channel oxygen gas analyzer system zr22/av550g

Multi Channel Oxygen Gas Analyzer System ZR22/AV550G

Zirconia Oxygen Probe/Sensor - ZR22The industry leading ZR22 in-situ type Zirconia detector provides dependable and accurate oxygen measurement. Available in lengths from 15 cm to 5.4 meters, the ZR22 can be used in process temperatures up to 700ºC (up to 1871ºC with our close-couple
CALL
high sensitivity laser spectrometer tdls5500 gas analyzer

High Sensitivity Laser Spectrometer TDLS5500 Gas Analyzer

TDLS5500 is trace gas analyzer by OFCEAS (Optical Feedback Cavity Enhanced Absorption Spectroscopy) Technology and LPS (Low Pressure Sampling). It is also a computerized device that measures the amount of gas contained in the process in real time.The optical resonator structure makes the
CALL
gas analyzer type tunable diode laser spectrometer tdls8200

Gas Analyzer type Tunable Diode Laser Spectrometer TDLS8200

Yokogawa’s new TDLS8200 continues to house all of the industry’s leading features from the TDLS8000, but now only requiring a single-flange installation. An in-situ measurement with a probe still removes the requirement for sample extraction and conditioning and can be used in variety of
CALL
in-situ gas analyzer tdls8000

In-Situ Gas Analyzer TDLS8000

Analyzer that realizes real-time feedback and adds value to users through active use such as process control and safety controlEnergy-efficient furnaces, etc., and safety and stable operation contribute to improving OPEX and reducing environmental impact.Rapid feedback of process output
CALL
yta70p temp transmitter

YTA70P Temp Transmitter

The YTA70P delivers the characteristics of both converters and transmitters. It has a space-saving design that offers low cost installation. The HART 7 protocol allows you to conveniently configure the transmitter using the latest FDT/DTM technology. HART 7 benefits include long tag, enhanced burst
CALL
yta50 temp transmitter

YTA50 Temp Transmitter

The YTA50 is a head mount temperature transmitter with a single input. The single input accepts thermocouples, RTD, Ohms or a DC millivolt source. All inputs are linearized and converted in to an industrial standard 4 to 20 mA DC output for transmission to your system. YTA50 is the choice for your m
CALL
yta70 temp transmitter

YTA70 Temp Transmitter

The YTA70 delivers all the benefits found in the YTA50 while adding HART digital protocol communication. The HART protocol allows you to conveniently configue the transmitter using the latest FDT/DTM technology. The YTA70 is the choice for all your control applications.YTA70 features inc
CALL
yta710 temp transmitter

YTA710 Temp Transmitter

The YTA710 provides high accuracy, stability, and reliability. The housing structure adopts reliable dual-compartment structure. The sensor input can be choice of single or dual inputs. This input can accept the RTD, thermocouple, ohm, or DC millivolt. It converts the sensor input to a 4 to 20mA DC
CALL
yta610 temp transmitter

YTA610 Temp Transmitter

The YTA610 provides high accuracy, stability, and reliability. The housing structure adopts reliable dual-compartment structure. The sensor input can be choice of single or dual inputs. This input can accept the RTD, thermocouple, ohm, or DC millivolt. It converts the sensor input to a 4 to 20 mA DC
CALL
vortex flow meter vy series

Vortex Flow meter VY series

Vortex flowmeters are highly versatile flowmeters that can measure liquids, gases, and steam over a wide range of temperatures and pressures. The advantages offered by this type of flowmeter make them better suited than other types to measuring steam flow.Steam is the most commonly used
CALL
admag axw magnetic flow meter

ADMAG AXW Magnetic Flow meter

The ADMAG Total Insight (TI) series ADMAG AXW adopts the "Total Insight" concept and totally support the product life cycle.ADMAG AXW magnetic flowmeter is a high-quality and highly reliable product developed based on years of experience and achievement, such as enhancement of applicatio
CALL
  •     dari   2   halaman
    •